Walbro Electric In-Tank Fuel Pump| (535 LPH KIT)

Walbro Electric In-Tank Fuel Pump (535 LPH KIT)

Regular price $199.99 Save $-199.99

SKU: F90000295

Select Extras

Only -5 items in stock!
Shipping calculated at checkout.

Walbro Electric In-Tank Fuel Pumps

Walbro electric in-tank fuel pumps are available in a variety of flow ratings, including pumps that flow significantly more fuel at higher pressure. The outside dimensions, however, of many pumps are compact enough to fit existing hanger assemblies, without modification. All pumping components have been validated to OEM specifications for use in E85/flex fuel applications.

Most Walbro in-tank fuel pumps utilize a proven gerotor design. Some high-performance models, including those designed for engines with more than 750 hp, feature a dual-channel turbine design for maximum efficiency in high-pressure and high-temperature applications. The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge. This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that's higher than conventional pumps. Some pumps require modifications to system wiring, fuel lines, and the fuel module, and should be professionally installed.

Installation kits (400-1168) including a fuel strainer, fuel hose, harness pigtail, clamps, and wire connectors are sold separately.

New DCSS 39/50 High-Performance Pump – F90000295:
- Highest flow in-tank brushed fuel pump offering from TI Automotive / Walbro
- No Internal check valve - ideal for racing applications to build oil pressure prior to start-up
- Featuring award winning DCSS technology
- E85 compatible
- High-pressure relief setting - supports supercharger and turbo applications
- Capable of supporting 900+HP at 60PSI naturally aspirated applications

 GAS & E85
Horsepower: 900+ at 60PSI, naturally aspirated applications
Over All Pump Length: 131mm
Main Housing Diameter: 39mm
Lower Housing Diameter: 50mm
Fuel Inlet Diameter: 11mm OD
Fuel Outlet Diameter: 11mm OD
Flow Rate: 535LPH at 40psi
Test Voltage: 13.5 Volts

Note: Pump does NOT have a check valve

NOTE: All Power estimates are for 3 Bar of Fuel Pressure, and are HP and KW at the engine.

Naturally Aspirated 1072HP / 799KW Naturally Aspirated 800HP / 596KW
Up To 1 Bar Boost 839HP / 626KW Up To 1 Bar Boost 615HP / 459KW
1 to 2 Bar Boost 775HP / 578KW 1 to 2 Bar Boost 548HP / 408KW