2009-2015 LSA SUPERCHARGED 58X w/ 6L80E/6L90E Standalone Harness
2009-2015 LSA SUPERCHARGED 58X w/ 6L80E/6L90E Standalone Harness
2009-2015 LSA SUPERCHARGED 58X w/ 6L80E/6L90E Standalone Harness
2009-2015 LSA SUPERCHARGED 58X w/ 6L80E/6L90E Standalone Harness
2009-2015 LSA SUPERCHARGED 58X w/ 6L80E/6L90E Standalone Harness
2009-2015 LSA SUPERCHARGED 58X w/ 6L80E/6L90E Standalone Harness
2009-2015 LSA SUPERCHARGED 58X w/ 6L80E/6L90E Standalone Harness
2009-2015 LSA SUPERCHARGED 58X w/ 6L80E/6L90E Standalone Harness
2009-2015 LSA SUPERCHARGED 58X w/ 6L80E/6L90E Standalone Harness
2009-2015 LSA SUPERCHARGED 58X w/ 6L80E/6L90E Standalone Harness
2009-2015 LSA SUPERCHARGED 58X w/ 6L80E/6L90E Standalone Harness
2009-2015 LSA SUPERCHARGED 58X w/ 6L80E/6L90E Standalone Harness
2009-2015 LSA SUPERCHARGED 58X w/ 6L80E/6L90E Standalone Harness

2009-2015 LSA SUPERCHARGED 58X w/ 6L80E/6L90E Standalone Harness

Regular price $819.00 Save $-819.00
/

SKU: HAR-1098

Select Extras

Only 0 items in stock!
Shipping calculated at checkout.

2009-2015 LSA SUPERCHARGED 58X w/ 6L80E/6L90E Standalone Harness


APPLICATION: 2009 - 2015 LSA ENGINES WITH 6L80E/6L90E AUTOMATIC TRANS 

*NOT FOR AN LS OR VORTEC ENGINE WITH AN LSA BLOWER INSTALLED*

PARTS INCLUDED: Complete engine and transmission wiring Harness, Instruction Manual

CONNECTIONS FOR:

  • Fuse/Relay Box
  • Fuel Pump Control (Relay included)
  • Fan controls (Relays and fuse available separately KIT-1010)
  • Check Engine Light, Speedo output, Tachometer, OBD2 Port
  • Accelerator Pedal and Throttle Body control (DBW setups)
  • MAF Sensor
  • MAP Sensor
  • Engine Coolant Temp
  • Alternator
  • (2) Upstream Oxygen Sensors
  • Crankshaft Position
  • Camshaft Position
  • Fuel Injectors
  • Coil Packs
  • Automatic or Manual Transmission control
  • Knock Sensors

NOTES: These Harnesses are designed for retrofitting '09 - '15 LSA engines with a 6L80E/6L90E automatic transmission into older muscle cars and street rods or newer non-emissions controlled vehicles. They are completely plug and play with four wire hookup (switched power, constant power and ground connections required). Harnesses are designed with a sliding grommet seal and 4 - 5 feet of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. A sliding grommet seal allows for professional, leak proof installation.

Harnesses are professionally constructed from Brand New GM Delphi Connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications. All Harnesses are 100% Quality Inspected prior to shipping. All Harnesses require PCM VATs removal, available through PSI. Please contact PSI for more information.

NOTE: Plugs directly into the Factory LSA Coil / Injector Sub-Harnesses. IF USING AN LS OR VORTEC ENGINE AND ADDING AN LSA BLOWER USE OUR REGULAR LS HARNESS SKU: HAR-1086.

ADDITIONAL ITEMS REQUIRED: E67 PCM, PSI P/N PCM-1011.


(Warning) This is a RACE ONLY product manufactured and sold for installation on vehicles to be used solely for competition purposes. Once this part is installed, the vehicle may never be used, or registered or licensed for use, on a public road or highway. If you install this part on your vehicle and use the vehicle on a public road or highway, you will violate the Clean Air Act 203(a)(3), 42 U.S.C, 7522(a)(3) and may be subject to personal civil or criminal liability.