Bosch 52lb EV14 Injectors (LS1 & LS6)

These are brand new Bosch EVI4 injectors

STD 60MM TALL

52 lb Bosch EV14 High Impedance

Genuine Bosch High Impedance Injectors 

 

These injectors flow 52lbs/hr at 43.5 PSI ( 3 BAR ) and more at higher PSI. In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; These injectors represent the most current Bosch engineering and are used on many high power oem applications.

 

These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. Many tuners push these injectors to 6 bar and higher.

 

Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors “pencil stream” high flow injectors; these High Flow injectors utilize a multi-orifice tip for improved mixture preparation and atomization. This results in lower BSFC and better idle quality than many injectors with less flow.

 

Features:

Genuine, reliable Bosch Injectors

Excellent response characteristics

Robust Design

High Impedance

Low Impedance performance characteristics with High Impedance Compatibility 

 

Specifications: Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)

Spray Pattern: Wide Split Cone, (6 orifice) OR SINGLE TIP

Electrical Connector: USCAR (New-style V=EV6 / Oval / LS2).  Ev1 adapter included free

Fitted with Viton upper and lower o-rings.

Overall Length: 65.5mm

Dimensions: 48.5mm o-ring seat to seat, 53.5mm o-ring centerline to centerline